CONSTRUCTION OF STEEL - SHELF
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 50 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 5,072 times
INSTANT PROJECT MATERIAL DOWNLOADABSTRACT
The steel-shelf was constructed at the mechanical Engineering workshop of the Institute.
The first step taken in the fabrication of the shelf was the selection of the material suitable for the construction; mild steel was chosen.
The construction has the following steps: drawing and dimensioning of the proposed steel – shelf, market surveying and procurement of the needed materials, marketing out and cutting of the material, welding, filling, and finally painting to prevent corrosion. The dimension of the steel – shelf are:
1219.2mm height, 939.8mm width and 457.2mm breadth.
The purpose is to produce a steel shelf that will be economically cheap and can meet up to the standard in the market.
TABLE OF CONTENTS
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
2.0 Literature review
2.1 History of the steel-shelf
2.2 Types of shelve 7
2.3 The design of shelf
2.4 Steel making
2.5 Comparism of wood and steel
2.6 Material of construction
2.7 Corrosion
2.8 Prevention of corrosion
2.9 Maintenance of shelf
CHAPTER THREE
3.1 Construction procedure
3.2 Description of the modern steel-shelf
3.3 Safety precaution
3.4 Observations
CHAPTER FOUR
4.1 Cost analysis
4.2 Discussion
4.3 Recommendation
4.4 Conclusion
References
CHAPTER ONE
INTRODUCTION
A steel shelf is a set of shelves made of steel with compartments and partitions where books or files and other reference materials are kept in the libraries. It can be used to store chemicals and other laboratory equipments or apparatues in the laboratories. It can also be used to store other valuable materials at home and industries. When used in libraries for packing books it is called book shelf but if it is used in industries to store materials it is referred to as facility for storage.
A shelf can be made of wood, glass or metal (steel). It could be dismountable or undismountable. In consideration of some factors, we decided to design and fabricate an unddismountable steel shelf. This undismountable steel-shelf has a longer life span and serve its purpose better than any other shelf.
Being undismountable, there will be no lose of parts as in dismountable ones. Also, steel as a material of construction has advantage over wood which can be attached by termits; and glass which can easily be broken.
Though corrosion as a result of reaction of air (oxygen), moisture and chemicals do attack the surface of metals, painting of the steel was done in order to reduce or eliminate this problems of corrosion. Considering the availability durability, quality and affordability of this steels, research or the engineering properties of the material was carried out. Steel as a material of construction is the cheapest, the most common and the most versatile metal used in industries all over the world. It can be cast; drawn, hot or cold; rolled; pressed, welded etc.
There are many grades of carbon steel which includes: low. Carbon steel (mild steel) that contains. (0.1 – 0.3)% of carbon. It is of two types Black-mild steel and Bright-mild steel. Another is medium carbon steel which contain (0.3 – 0.7)% of carbon and High Carbon steel that contain (0.7 – 1.5)% of carbon.
In our project, low carbon steel or wild steel was used because it is used for general Engineering purpose. It has limited corrosion resistance, should not be used with dilute acids like sulphuric acid of less than 90% concentration. Even for concentration above 90%, the use of steel is still imited to certain ranges of temperature defined in accordance with the chemicals in contact with the steel. It does not all with stand hydrochoric, phosphoric or nitric acids irrespective of the level of temperature and concentration.
It can be used to store organic solvents and other similar chemicals. It is non-hazardsous and resists termites. This is the area in which cost of production was made by adopting some amendments with the aim of achieving the modern steel-shelf of a standard size.
Furthermore, to produce a quality and long lasting steel-shelf, the vartous parts were arranged and shaped, connected in such a way that it affords an efficient and economical solution to the construction problems. The shelf was also fitted with rollers stands and stoppers for stability at any given point. It was solidly welded for easy movement. Infact, the steel-shelf was constructed to the teste of maintenance and durability.
This material content is developed to serve as a GUIDE for students to conduct academic research
DOWNLOAD THIS PROJECT MATERIAL NOW!
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
PREPARATION OF SOAP USING DIFFERENT TYPES OF OILS AND EXPLORING ITS PROPERTIES
ABSTRACT Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification proces...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 2.
THE REFURBISHMENT OF TEMPERATURE CONTROL APPARATUS
ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the ...More »
Item Type: Project Material | 50 pages | 8,503 engagements |
- 3.
PRODUCTION OF CRUDE OIL-DRILLING PROCESS
ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals...More »
Item Type: Project Material | 50 pages | 0 engagements |
- 4.
PRODUCTION OF LIQUID AND VAPORIZED PERFUME
ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The ...More »
Item Type: Project Material | 50 pages | 14,391 engagements |
- 5.
PROCESS AND QUALITY FACTORS IN LAUNDRY AND TOILET SOAP PRODUCTION
ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the...More »
Item Type: Project Material | 50 pages | 9,007 engagements |
- 6.
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT
ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials use...More »
Item Type: Project Material | 50 pages | 9,009 engagements |