Home » Environmental Science » COMPARATIVE CHARACTERIZATION OF BIODIESELS PRODUCED BY TRANSESTERIFICATION FROM ...
COMPARATIVE CHARACTERIZATION OF BIODIESELS PRODUCED BY TRANSESTERIFICATION FROM Jatrpha curcas AND Thevetia nerifolia SEEDS
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 70 pages | 1-5 chapters | Amount: ₦5,000 | 1 order. | Marked useful: 5,491 times
INSTANT PROJECT MATERIAL DOWNLOADCOMPARATIVE CHARACTERIZATION OF BIODIESELS PRODUCED BY TRANSESTERIFICATION FROM Jatrpha curcas AND Thevetia nerifolia SEEDS
ABSTRACT
Increasing scarcity of fossil resources, increasing demand for petroleum fuels as well as increasing detrimental effects of extracting and using fossil fuels suggests alternatives. Biodiesel is a renewable, environmentally friendly, socially acceptable, technologically feasible and economically viable alternative fuel for diesel engines.
This study investigates the comparative characterization of biodiesels produced by transesterification from Jatrpha curcas and Thevetia nerifolia seed oil using ratio 1:5, 1:6, and 1:7 of methanol and oil and base catalyst (NaOH), at temperature of 60oC.
The percentage oil and biodiesel yield and the physco-chemical properties (PH, specific gravity, viscosity and flash point) of the methyl ester biodiesels were determined. The values of the biodiesel properties obtained were compared with America (ASTM) and European (EN) biodiesel standard. The data was analyzed using Randomized Complete Block Design (RCBD).
The result of this study shows that reaction ratio 1:5 has the highest biodiesel yield of 91%, 82% and 70% from Jatropha, Thevetia and the mixture respectively. There is a significant difference in the biodiesel yield among the three oil sources. The flash point increases with increase in the specific gravity of the biodiesels. The highest and lowest viscosity value (mm2/s) of 6.44 and 1.2 was recorded for mixture (1:7) and Jatropha (1:7) respectively. The biodiesel with the highest and lowest viscosity value and the biodiesels from thevetia (1:6 and 1:7) do not meet the ASTM and EN specifications which ranges between 1.9-6.0 and 3.5-5.0 respectively. Others meet the ASTM Specification (Table 4 and 5). Finally, the result of this study shows that Jatropha curcas and Thevetia nerifolia are good potential sources of oil for biodiesel production
This material content is developed to serve as a GUIDE for students to conduct academic research
DOWNLOAD THIS PROJECT MATERIAL NOW!
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
THE ROLE OF SOCIAL MEDIA IN RAISING AWARENESS AND CHANGING BEHAVIORS TOWARDS SOLID WASTE MANAGEMENT ...
THE ROLE OF SOCIAL MEDIA IN RAISING AWARENESS AND CHANGING BEHAVIORS TOWARDS SOLID WASTE MANAGEMENT IN CAMEROON CHAPTER ONE INTRODUCTION Backg...More »
Item Type: Project Material | 54 pages | 903 engagements |
- 2.
THE INFLUENCE OF SOCIOECONOMIC FACTORS ON SEWAGE DISPOSAL PRACTICES IN DOUALA, CAMEROON
CHAPTER ONE INTRODUCTION Background of the Study Sewage is the term used to describe the water that has been utilised by a community or industry...More »
Item Type: Project Material | 54 pages | 19,396 engagements |
- 3.
EVALUATING THE EFFECTIVENESS OF SEWAGE TREATMENT PLANTS IN PREVENTING ENVIRONMENTAL POLLUTION IN YAO...
CHAPTER ONE INTRODUCTION Background of the Study Globally, the rapid increase in urbanization, driven by the migration of people from rural and semi u...More »
Item Type: Project Material | 54 pages | 360 engagements |
- 4.
ASSESSMENT OF THE IMPACT OF SEWAGE DISPOSAL PRACTICES ON WATER QUALITY IN URBAN AREAS OF CAMEROON: A...
CHAPTER ONE INTRODUCTION Background of the Study In developed and developing nations, dues to human activities, residences, institutions, hospitals...More »
Item Type: Project Material | 54 pages | 363 engagements |
- 5.
ASSESSMENT OF THE ENVIRONMENTAL IMPACT OF INDUSTRIAL WASTEWATER DISPOSAL IN THE EAST REGION OF CAMER...
CHAPTER ONE INTRODUCTION Background of the Study Worldwide, many manufacturing industries depend on water for many uses such as manufacturing processe...More »
Item Type: Project Material | 54 pages | 396 engagements |
- 6.
ASSESSMENT OF THE CHALLENGES IN IMPLEMENTING SOLID WASTE MANAGEMENT POLICIES IN CAMEROON
CHAPTER ONE INTRODUCTION Background of the Study Globally, designing effective waste management policies and procedures has become the task of environ...More »
Item Type: Project Material | 54 pages | 385 engagements |