Chemical Engineering Project Topics & Materials In PDF, Doc.

1. COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON

» ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after preliminary treatment of the palm oil. The 10 di...Continue Reading »

Item Type: Project Material | 65 pages | 6,237 engagements |

2. THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSI...

» ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia, deformer (Ginap) kerosene, yellow iron oxide an...Continue Reading »

Item Type: Project Material | 65 pages | 8,474 engagements |

3. DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER

» TABLE OF CONTENT CHAPTER ONE Introduction CHAPTER TWO 2.0 Literature Review 2.0.1 Classification of heat Exchanger 2.0.2 Categories of heat exchangers 2.0.3 Types of heat exchangers 2.0.4 Material for constructions 2.0.5 Tube shape and position 2.0.6 Firing 2.0.7 Heat so...Continue Reading »

Item Type: Project Material | 65 pages | 5,251 engagements |

4. CONSTRUCTION OF A PILOT MOTORISED MIXER

» ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. Some basic workshop practices was carried out during the construction such as the marking out of the metal sheet, cutting of different si...Continue Reading »

Item Type: Project Material | 65 pages | 4,821 engagements |

5. CONSTRUCTION OF A BLENDER

» ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major driver force. During the construction of blen...Continue Reading »

Item Type: Project Material | 65 pages | 6,514 engagements |

6. CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

» ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the si...Continue Reading »

Item Type: Project Material | 65 pages | 4,978 engagements |

7. THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL

» ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method. It was then activated into two different samples. Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating as a control for the experiment; both at a const...Continue Reading »

Item Type: Project Material | 65 pages | 7,751 engagements |

8. CONSTRUCTION OF INDUSTRIAL WHEEL BARROW

» ABSTRACT Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose. How ever, mateials used for the cnstruction of wheelbarrow are bought in standard sizes either in long bare eg for the handle or in st...Continue Reading »

Item Type: Project Material | 65 pages | 5,057 engagements |

9. A PROJECT REPORT ON CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

» ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the si...Continue Reading »

Item Type: Project Material | 65 pages | 5,606 engagements |

10. PRODUCTION OF DOMESTIC POWDER

» ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown) were the materials used in the production ...Continue Reading »

Item Type: Project Material | 65 pages | 6,978 engagements |

11. CONSTRUCTION OF 500 GALION (2250 LITRES) WATER RESERVOIR

» ABSTRACT The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope of the project emphasized the construction and installation ...Continue Reading »

Item Type: Project Material | 65 pages | 4,569 engagements |

12. CONSTRUCTION OF A "CHEMICAL RACK"

» ABSTRACT The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal during construction. The main purpose of constructing this metal rack is to be used for storing chemicals in the laboratory for easy accessibility and safe keeping. The to tal cost of the constructional project was estimated at the...Continue Reading »

Item Type: Project Material | 65 pages | 4,904 engagements |

13. CONSTRUCTION OF A METAL RACK

» ABSTRACT This project report is on the construction of a metal rack which can be put to use in laboratories, industries, shops, kitchens, and also for displaying various articles. The construction work was done in a mechanical work shop. Racks are of various types which concides with the numerous uses to which they are applied. Some types of racks includes wooden racks and metal. The metal rack wa...Continue Reading »

Item Type: Project Material | 67 pages | 5,092 engagements |

14. CONSTRUCTION OF A JUICE EXTRACTOR MACHINE

» ABSTRACT A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools. The material used for the construction of the machine is mild steel sheet. During the construction of the machine, the various parts of it were constructed sep...Continue Reading »

Item Type: Project Material | 65 pages | 8,217 engagements |

15. CONSTRUCTION OF KEROSENE COOKING STOVE

» ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are; machinability ,weldability,durability,andformability.me...Continue Reading »

Item Type: Project Material | 65 pages | 5,063 engagements |

16. CONSTRUCTION OF HYDRO CYCLONE

» ABSTRACT A cyclone is an equipment or a device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form. This project is constructed for the separation of liquid – liquid and solid – ...Continue Reading »

Item Type: Project Material | 65 pages | 5,178 engagements |

17. CONSTRUCTION OF A CHEMICAL RACK, STUDY APPARATUS

» ABSTRACT The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope of the project emphasized the construction and installation of a reservoir for wate...Continue Reading »

Item Type: Project Material | 65 pages | 4,547 engagements |

18. CONSTRUCTION OF AN INDUSTRIAL BARROW

» ABSTRACT An Industrial barrow was produced which would aid in conveying heavy materials in the laboratory and industrial set up. It was made from mild steel that was cut to dimension, made into shape and coupled to form the desired outstanding barrow. Details are shown in chart (fig 1) containing the picture representation. Some of it’s dimensions are; Bucket ...Continue Reading »

Item Type: Project Material | 65 pages | 4,542 engagements |

19. CONSTRUCTION OF A MODEL SHELL AND TUBE HEAT EXCHANGER

» ABSTRACT The precise content of this project was to construct a model shell and tube heat exchanger. The material for construction of this project (equipment) and their dimensions are as follows: 500mm length of a tube bundle 20mm diameter of the tube bundle 650mm length of the shell 120mm diameter of the shell 70mm length of the inlet and outlet 20.5mm diameter ...Continue Reading »

Item Type: Project Material | 65 pages | 5,443 engagements |

20. CONSTRUCTION OF A DISTILLATION COLUMN WITH REFLEX DIVIDER AND CONDENSER

» ABSTRACT In this project, distillation is made up of a column, condenser and reflux divider. An overview of the dimensions of some of the major parts is: Height of the column = 450mm Diameter of the column = 100mm Length of the condenser = 150mm Diameter of the condenser =90mm Diameter of the pipe = 22mm Length of the reflux divider = 150mm Height of the reflux divider = 150mm Width of the refl...Continue Reading »

Item Type: Project Material | 65 pages | 5,612 engagements |

21. CONSTRUCTION OF HEAT EXCHANGER FABRICATION OF A TUBE AND SHELL HEAT EXCHANGER SY...

» ABSTRACT There are two methods of constructing heat exchangers: Plate type. Parallel flow the hot fluid and the coolant flow in the same direction. Counter flow: The hot fluid and the coolant flow in opposite direction. Cross flow: The hot fluid and the coolant flow at 90 angles (perpendicular) to each other. �...Continue Reading »

Item Type: Project Material | 65 pages | 4,973 engagements |

22. CONSTRUCTION OF AIR CONDITIONING UNIT

» ABSTRACT The project of construction is one (1) horse power Air conditioning unit which was executed successfully. With up to seventy five percent (75%) efficient performance. The project started with the construction of the size of the air conditioning unit. The air conditioning unit is 60x40x 45cm in dimension. Air conditioners employ the same operating principle and basic components...Continue Reading »

Item Type: Project Material | 65 pages | 5,968 engagements |

23. CONSTRUCTION OF ALUMINIUM WALL RACK

» ABSTRACT This project was constructed with the desired materials of construction. The materials include aluminum, glass and wood. Aluminum was used in forming the skeleton of the structure, glass was used for the doors while wood was used in the sides, top, base and partitions. After building the skeleton of the structure with aluminum, other mate...Continue Reading »

Item Type: Project Material | 65 pages | 4,979 engagements |

24. CONSTRUCTION OF OFFICE TABLE AND CHAIRS

» ABSTRACT Office table and chairs usually come in set of three, and are designed to fit one into another for convenient storage. Furniture of this soot should be of the highest quality, attractive in design and capable of standing up to many years in use. The cost of the wood and the amount of time spent on this project may restrict you to making one table only and the c...Continue Reading »

Item Type: Project Material | 65 pages | 8,591 engagements |

25. THE CONSTRUCTION OF SAND FILTER FOR PORTABLE WATER FILTRATION WITH STAINLESS STE...

» ABSTRACT The project constructed was sand filter; equipment for portable water filtration. This was constructed using a mild steel material. This was because of the excellent high qualities of mild steel such as; durability tensile strength, high corrosion resistance and also relative in cost compare to other special alloyed materials, like stainless steel. The send filter was chosen to be ...Continue Reading »

Item Type: Project Material | 65 pages | 6,433 engagements |

What's your project topic?

Chemical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One