What's your project topic?

| Back |

Chemical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

  • 1. CONSTRUCTION OF SOAP CUTTING TABLE, SOAP MOULD AND SOAP CUTTERS

    »   ABSTRACT           The construction of soap cutting table, mould and cutters became inevitable as it’s importance in our industries and society could not be over emphasized.           When one considers the money at hand, he decides whether to start from the primary production level or secondary production level.           Every establishment starts from the small s...Continue Reading »

    Item Type: Project Material |  65 pages |  7,428 engagements | 

  • 2. INDUSTRIAL WASTEWATER TREATMENT TECHNOLOGY IN PETROLEUM AND CHEMICAL INDUSTRIAL

    »   ABSTRACT Industrial wastewater treatment covers the mechanisms and process used to treat water that have been contaminated in some way by anthropogenic industrial or commercial activities prior to its release into the environment or its re use.         Water is a natural and inorganic solvent with the composition of hydrogen and oxygen only (H20).  When there is addition of other organi...Continue Reading »

    Item Type: Project Material |  65 pages |  6,517 engagements | 

  • 3. PRODUCTION OF CASSAVA OF STARCH FROM CASSAVA

    »   ABSTRACT The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A and sample B respectively (edible and textile starch) which weighed 13.1kg. During this process, the temperature were obtained at 700c (61...Continue Reading »

    Item Type: Project Material |  65 pages |  6,088 engagements | 

  • 4. REFINING OF VEGETABLE OIL WITH ENUGU COAL

    »   ABSTRACT This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coal as a bleaching agent for palm oil. The Enugu coal samples were collected, size reduced, carbonized and activated with acid (phosphoric Acid) befo...Continue Reading »

    Item Type: Project Material |  65 pages |  5,085 engagements | 

  • 5. CONSTRUCTION OF WHEELBARROW

    »   ABSTRACT Wheelbarrow can be defined as a machine that is used by labourers, farmes, gardeness, and others for transporting loads to heavy by hand it from one place to another. However, materials used for construction purpose are bought in standard sizes wither in long bars or standard sheet sizes.  Moreover, depending on the type to be constructed, the materials are then reduced to smaller and...Continue Reading »

    Item Type: Project Material |  65 pages |  6,407 engagements | 

  • 6. PRODUCTION OF PLASTIC MATERIALS

    »   ABSTRACT Generally, plastic is defined as long chain organic material which can be formed into desired shape by the application of heat and pressure, also it extends to include so many organic metallic complex and also certain long chain inorganic material based principally on silicon, phosphorus, nitrogen, aluminum or boron or mixtures of these. It is still however true to say that the bulk of...Continue Reading »

    Item Type: Project Material |  65 pages |  6,397 engagements | 

  • 7. PRODUCTION OF HIGH QUALITY LIQUID AIR REFRESHER

    »   ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the production of liquid air refreshner are: Amyl alcohol, et...Continue Reading »

    Item Type: Project Material |  65 pages |  10,464 engagements | 

  • 8. CRISES MANAGEMENT IN INDUSTRIAL ENVIRONMENT

    »   ABSTRACT A study was carried out on crisis management which originated with the large scale industrial and environment disaster in the 1980’s. Crisis management is the process by which an organization deals with a major event that threatens to harm to the organization, its stakeholders, or the general public.         According to Research, it was shown that there were three elements co...Continue Reading »

    Item Type: Project Material |  65 pages |  5,129 engagements | 

  • 9. CONSTRUCTION OF 2,000 LITRES CAPACITY WATER RE-SERVOIR

    »   ABSTRACT In the construct of 2,000 litres capacity water reservoir galvanized  steel  sheet forms the tank and an angle iron rod forms the stand.  Two full length galvanized sheet were marked out and cut out to the required sizes.  The work stated by cutting the it gauges galvanized steel sheets of full length into geometrical dimensions of the cylindrical shape After cutting, the different...Continue Reading »

    Item Type: Project Material |  65 pages |  5,483 engagements | 

  • 10. SYTHESIS OF ACTIVATED CARBON

    »                           ABSTRACT This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State.  Activated coal was produced by carbonizing the coal and activating it using phosphoric acid at a temperature of 5500c.  the degree of bleaching of raw palm oil was monitored using spectronic meter through absorbance measurement.  The essence was ...Continue Reading »

    Item Type: Project Material |  65 pages |  4,840 engagements | 

  • 11. TEMPERATURE AND WATER REQUIREMENT FOR LEACHING OF CAUSTIC ALKALT FROM 'NGU"

    »   ABSTRACT The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project.  The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw material.  The female inflorescence of palm fruit was size reduced from original dimen...Continue Reading »

    Item Type: Project Material |  65 pages |  4,897 engagements | 

  • 12. PRODUCTION OF WOOD ADHESIVE

    »   ABSTRACT Adhesive is a substance that holds materials together by surface attachment, while wood adhesive is a substance that is used to hold plywood for furniture works. This substance is essential and has universal applications. Thus the aim of this research work is to produce it using cassava starch as a base binder. Starch is also used in industries to produce ethanol and glucose for textil...Continue Reading »

    Item Type: Project Material |  65 pages |  7,653 engagements | 

  • 13. REFURBISHING OF A FIXED AND FLUIDIZED BED

    »   ABSTRACT The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of operation because of the completely blocked base of the fixed bed column (water column) and the malfunctioning of the air control value. The sintered b...Continue Reading »

    Item Type: Project Material |  65 pages |  4,650 engagements | 

  • 14. MAINTENANCE OF PILOT PLANT SPRAY DRYER

    »   ABSTRACT Spray substance are used to make home grnow powered substance whose particles are usually spherical in shape and approximately 10 40 micro s. The maintenance of pilot plant spray dryer was stated with observation of the faults in the spray dryer. The faulty components were dismantled, serviced and the faulty parts maintained in order to increase it’s life span.  TABLE OF CONTENTS  ...Continue Reading »

    Item Type: Project Material |  65 pages |  4,942 engagements | 

  • 15. FORMULATION AND COMPARISM OF INDUSTRIAL BAR SOAP AND DETERGENT

    »   ABSTRACT Stabilized adhesive was developed and produced.  The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives.  From the various formulations made, it was observed that formulations A is the best for paper adhesive. In the formulation, starch was used as the binder, NaOH as a gelatinize,  CaCO3 as the fille...Continue Reading »

    Item Type: Project Material |  65 pages |  6,041 engagements | 

  • 16. MANUFACTURE OF CEILING BOARD USING LOCAL MATERIALS

    »   ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards were produced, their difference being in the type of fi...Continue Reading »

    Item Type: Project Material |  65 pages |  10,606 engagements | 

  • 17. MODIFICATION OF PROTO-TYPE AIR CONDITIONING UNIT

    »   ABSTRACT The need for an authentic and reliable report relating to the modification of a proto type air conditioning unit is inevitable.  Many homes and offices use the air conditioner to cool the temperature in their respective homes and offices, so the maintenance of the air conditioner should be a top priority of every individual in order to avoid huge expenditure in the modification of the...Continue Reading »

    Item Type: Project Material |  65 pages |  5,065 engagements | 

  • 18. INTERFACE MONITORING AND ANALYSIS OF PIPELINE AND PRODUCTS MARKETING COMPANY LIM...

    »   ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot.  In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major products that were considered in this research were ...Continue Reading »

    Item Type: Project Material |  65 pages |  7,550 engagements | 

  • 19. ADSORPTION OF PALM OIL WITH SYNTHETIC ADSORBENT (COAL)

    »   ABSTRACT This project was Carrie lent using sub bituminous coal and crude palm oil.  The degree of bleaching of the palm oil was monitored with a spectorphoto meter.  The coal was collected in a lump from the mine.  It air chiecl  to removed the   moisture content and thereafter, size reduced to a small particle size foe effective activation. The activation process was carried out in a fu...Continue Reading »

    Item Type: Project Material |  65 pages |  5,863 engagements | 

  • 20. PRODUCTION OF LIQUID AND VAPOURIZED PERFUME

    »   ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials.  The local raw material were subjected to various processing conditions in order to obtain purified perfume.  The methods generally used in this work include expression steam distillation and solvent extraction. During the production of vapourized and liqui...Continue Reading »

    Item Type: Project Material |  65 pages |  7,048 engagements | 

  • 21. ANALYSIS OF ENUGU COAL

    »   ABSTRACT The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized.  The coal sample (pulverized) was subjected to proximate and ultimate analysis to determine its characteristic constituents. Analysis showed a ...Continue Reading »

    Item Type: Project Material |  65 pages |  5,162 engagements | 

  • 22. PRODUCTION OF BLACK AND BROWN POLISH

    »   ABSTRACT This project is aimed at producing black and brown polish of good quality.  For clearity, polish is a substance rubbed on the surface of materials to make them smooth and shiny. Polish has being of immense importance in protecting leather surfaces and enhancing their beauty. To produce a standard polish, hard waxes such as carnduba wax, candelhla wax and palm wax; semi hard waxes whic...Continue Reading »

    Item Type: Project Material |  65 pages |  9,616 engagements | 

  • 23. PRODUCTION OF EMULSION PAINT WITH THE AVAILABLE MATERIAL

    »   ABSTRACT This project is on the production of paint from the available materials.  The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc.  the next step is the proper production procedure.  The  same product patterns was employed while the production was valued with a view to obtain a high quality paint. From the result ob...Continue Reading »

    Item Type: Project Material |  65 pages |  11,641 engagements | 

  • 24. PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCE...

    »   ABSTRACT The production of cassava flour by the method of traditional processing method (sun drying) and modern processing method (oven drying) was carried out using cassava sliced cubes or peeled cassava. Indeed, the traditional Nigeria techniques of cassava flour production was studied with a view of achieving same product mechanically. Result of this studies show that the processing time can...Continue Reading »

    Item Type: Project Material |  65 pages |  7,448 engagements | 

  • 25. EXTRACTION OF OIL FROM A LOCAL SEED (GROUNDNUT SEED) AND CHARACTERIZATION

    »   ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely: Ethane and order to compare their yield, physical and ch...Continue Reading »

    Item Type: Project Material |  65 pages |  13,458 engagements | 


Searching makes things a lot easier.. Search for what you are looking for

What's your project topic?